Terra Cotta flower pot
Place the mat on top of newspapers or some other kind of surface to catch all the pieces that fall off. It sheds a lot!
Wrap the base of the terra cotta pot around the sheet to see how much you need to cover it.
Cut the section out
Using the glue gun, apply glue liberally to the pot and wrapping the moss around as you go.
Put some glue on the seam and push down.
If the moss is too long, trim the excess
Since the pot is tapered at the bottom the moss sheet will be loose. Apply some glue and press the moss down.
The moss sheet will now be flush against the bottom part of the pot
Wrap the top of the terra cotta pot around the moss to measure for the top piece. Add another inch on so there is enough moss to cover the inside rim.
Glue the moss around the top
Apply some glue to the inside rim and then press the moss down
Using the spray adhesive, give the pot a fine coat. This will help prevent the moss from shedding