Stone and Chain Handpiece DIY

3:38 PM

Stone and Chain Handpiece DIY

There may be a foot of snow on the ground, but I'm thinking ahead to warmer weather! I don't wear many bracelets/rings in the winter- they get in the way with gloves and I constantly have my sweaters pulled down over my hands anyway. When the temperatures rise I love wearing gold jewelry. This Stone and Chain Handpiece DIY will work great with floaty summer dresses. I added the stone insert in the middle to make it look more earthy.

This chain handpiece is simple and fast to make. All you need are some basic jewelry making supplies. I listed the cain measurements I used but be sure to double check with your own measurements and make any adjustments, if needed. Happy crafting guys!
Supplies needed:
Gold chain
Wire cutters
Jump rings
Jewelry pliers
Eye pin
Stone beads
Lobster clasp
Want more DIY Jewelry Projects?
Stone and Chain Handpiece DIY
Cut 4 lengths of chain- one for the bracelet (6 1/2 inches), 1 for the ring (2 1/2 inches) and 2 for the connectors (1 inch each). Double check the length (especially the bracelet and ring) and make sure they fit your measurements)
Stone and Chain Handpiece DIY
Using the jewelry pliers, open the jump ring and attach the connector to the middle of the bracelet.
Stone and Chain Handpiece DIY
Open another jump ring and attach the eye pin


Stone and Chain Handpiece DIY
String some stones on to the eye pin
Stone and Chain Handpiece DIY
Twist the end of the eye pin into a loop. Add the second connector using a jump ring. 
Stone and Chain Handpiece DIY
Use another jump ring to attach the ring to itself and to the connector.
Stone and Chain Handpiece DIY
 Attach the lobster clasp
Stone and Chain Handpiece DIY
Stone and Chain Handpiece DIY
Stone and Chain Handpiece DIY
Follow

You Might Also Like

0 comments

Thanks so much for reading and taking the time to leave a comment.
♥ Gina